OKI MC360 Driver Download | Download Free Printer Driver

OKI MC360 Driver Download

Printer Driver Download OKI MC360

OKI MC360 Printer Driver Download. This OKI MC360 4-in-1 multifunction printer goes to the test bench. As I recently reported in other page, Oki continues to expand its range of SOHO and TPE oriented A4 multifunction printers. The new MC350 (3 in 1) and MC360 (4 in 1), two network-compatible models, are expanding the ranks of multifunctional LED display technology. When it comes out of cardboard, it is clear that the appearance and aesthetics of the Oki MC360 multifunctional do not leave indifferent: the prominence of the "printer" side facing the "copier / scanner" part is surprising. This structure is, however, induced by the horizontal tandem arrangement of single-pass LED exposure technology.

Driver Download OKI MC360 Printer Installer
The OKI MC360 printer therefore occupies a large area (24.45 dm²). Access to the four dual-component cartridges is therefore possible only after you have lifted the imposing scanner block, which is equipped with an automatic document feeder with a capacity of 50 sheets. If the OKI MC360 printer is woken up in a fairly heavy rumble, the sound measurements made during printing will place the MC360 on average, with a noise level of 62 dB. Moreover, its network characteristics do not make it a priority a desktop machine; The importance of this parameter is therefore relative. The user interface consists essentially of a twelve-button alphanumeric keypad with a navigation pad. The large monochrome display offers a five-line display. One will note the welcome presence of a USB port on the front, allowing a priority the direct management, from the control panel, of files contained on a key.

OKI MC360 Driver Printer Download

OKI MC360 Driver Download

Printer Driver OKI MC360 Download
The ergonomics of this panel is nevertheless perfectible, notably with regard to the response of the buttons, In particular that of printing cancellation, which is fairly ineffective. Performance and print quality With a 266 MHz processor and a standard 128 MB RAM (expandable to 320 MB), this multifunction is positioned by Oki in the 20 ppm black (16 ppm in colors). The speed test according to ISO / IEC 24734 nevertheless divides these performances by 2, with an actual print speed of 10 ipm in black and 8 ipm in color. New Disillusion: You can not directly print contents stored on a key from the front USB port.

Driver Printer Download OKI MC360
Depending on the software applications used, the output time of the first page (on-line printer) varies somewhat, but oscillates on average about fifteen seconds, which is correct. However, it reaches 50 seconds when the printer is in standby mode. Although the "green" trend continues to be widespread in the world of printing, we note (and regret!) The absence of an automatic two-sided output mode. In the same register, standby power consumption only drops to 24 watts: again, progress still needs to be made. The print quality, on the other hand, lives up to our expectations: by combining a resolution of 1200 x 600 dpi with its specific toner technology, Oki offers accurate printing accuracy in fine detail and fine print, Although a bit "greasy".

DOWNLOAD DRIVER (All OKI printer drivers and software from Official Source):

0 Response to "OKI MC360 Driver Download"

Post a Comment